by on
Avr DevelopmentDorkbot

das blinkin

das blinkin

With a lot of my projects I have done my prototyping with Paul Stoffregon’s Teensy series of boards before moving them onto their own codebases. On those occasions where the “prototype was all I needed” I would compile the code using the teensyduino and then manually load the .hex file onto the target. As I am looking at using the arduino for more projects I decided to take a look at how paul interacts with the Arduino IDE and see if I could load code directly onto my chips.

boards.txt

The arduino allows for different chips and configurations through the boards.txt and the programmers.txt files. Each configuration usually will also have a “core” which maps the pins and handles the particulars of that chip. When you run paul’s teensyduino installer it adds several entrys to the boards.txt file including the entry below.

teensy_ser.name=Teensy 1.0 (USB Serial)
teensy_ser.upload.protocol=halfkay
teensy_ser.upload.maximum_size=15872
teensy_ser.upload.speed=38400
teensy_ser.upload.disable_flushing=true
teensy_ser.upload.avrdude_wrapper=teensy_reboot
teensy_ser.build.mcu=at90usb162
teensy_ser.build.f_cpu=16000000L
teensy_ser.build.core=teensy_serial
teensy_ser.build.post_compile_script=teensy_post_compile
teensy_ser.name=Teensy 1.0 (USB Serial)
teensy_ser.upload.protocol=halfkay
teensy_ser.upload.maximum_size=15872
teensy_ser.upload.speed=38400
teensy_ser.upload.disable_flushing=true
teensy_ser.upload.avrdude_wrapper=teensy_reboot
teensy_ser.build.mcu=at90usb162
teensy_ser.build.f_cpu=16000000L
teensy_ser.build.core=teensy_serial
...
Looking at pauls additions to the boards.txt I see that he is using the teensy_serial core  that he has written to create a simple usb to serial interface and to map the usb avr pins and other peripherals to the arduino conventions. He is also adds an entry to the arduino uploader class which lets him use a wrapper for avrdude which lets him use his proprietary bootloader. This wrapper is installed by the Paul’s installer and  lives in the Arduino’s bin directory. After looking to see if this wrapper was a script I replaced the entry in the boards.txt and put a script into the bin directory called “dfume”, after seeing that my replacement wrapper worked I added two new entries for each class of avr that I wanted to use the atmega32u2 and the atmega32u4
#############################################################
fouryou.name = atMega32U4
fouryou.upload.protocol=atmega32u4<
fouryou.upload.maximum_size=32256
fouryou.upload.speed=38400
fouryou.upload.disable_flushing=true
fouryou.upload.avrdude_wrapper=dfume
fouryou.build.mcu=atmega32u4
fouryou.build.f_cpu=16000000L
fouryou.build.core=teensy_serial
#############################################################
tooyou.name = atMega32u2
tooyou.upload.protocol=atmega32u2
tooyou.upload.maximum_size=32256
tooyou.upload.speed=38400
tooyou.upload.disable_flushing=true
tooyou.upload.avrdude_wrapper=dfume
tooyou.build.mcu=at90usb162
tooyou.build.f_cpu=16000000L
tooyou.build.core=teensy_serial
#############################################################

fouryou.name = atMega32U4
fouryou.upload.protocol=atmega32u4
fouryou.upload.maximum_size=32256
fouryou.upload.speed=38400
fouryou.upload.disable_flushing=true
fouryou.upload.avrdude_wrapper=dfume
fouryou.build.mcu=atmega32u4
fouryou.build.f_cpu=16000000L
fouryou.build.core=teensy_serial

#############################################################

tooyou.name = atMega32u2
tooyou.upload.protocol=atmega32u2
tooyou.upload.maximum_size=32256
tooyou.upload.speed=38400
tooyou.upload.disable_flushing=true
tooyou.upload.avrdude_wrapper=dfume
tooyou.build.mcu=at90usb162
tooyou.build.f_cpu=16000000L
tooyou.build.core=teensy_serial

I started with a blank script that just printed the arguments passed to the wrapper and then called it by restarting my Arduino (to reload the boards.txt) And then selecting one of the new boards and “Uploading” my code. This gave me a window to interactively work through my script. Since the avrdude_wrapper code just pretends to be an avrdude most of the script is munging the arguments passed to avrdude to get the commands to pass to dfu-programmer.

#!/usr/bin/perl
use Getopt::Std;
print @ARGV;
my %args;
my $hexfile;
my $dfu = "/usr/local/bin/dfu-programmer";
my $cpu;
my $hexfile;

getopt('pUc',%args);
$hexfile=$args{U};
$hexfile =~ s/flash:w://;
$hexfile =~ s/:i//;
$cpu=$args{c};

print "n[" . $hexfile . "]";
print "n[" . $cpu . "]n";
print "$dfu $cpu erasen";
system "$dfu $cpu erase";
print "$dfu $cpu flash $hexfilen";
system"$dfu $cpu flash $hexfile";
print "$dfu $cpu startn";
system "$dfu $cpu start 1>&2";
print "n";
 

There is one tricky bit. The current avr-gcc doesnt support the atmega32u2 correctly but the code for the at90usb162 is binary compatible so the build.mcu is set to the at90usb162. But then dfu-programmer supports the correct chip and wont find the device so we use the fact that the upload.protocol argument is passed directlyalong using the -c argument and everything works fine.

So now we just use the hwb and reset buttons to get the system into dfu mode and upload our code directly from the arduino. Its not as slick as the teensy in “auto” mode but it works.

One Response to “Running Paul Stoffregons’s teensy_serial arduino core on DFU based chips.”

Leave a Reply

  • (will not be published)